YW-P系列電力液壓鼓式制動器 YW-P SERIES ELECTRO-HYDRAULIC DRUM BRAKES

應用 Application

·YW-P系列鼓式制動器，廣泛用于起重、運輸、冶金、礦山、港口、碼頭、建筑機械等機械驅動裝置的減速和停車制動。

·YW-Pseries drum brakes are widely used for deceleration and parking brakes of mechanical drivedevices such as lifting, transportation, metallurgy, mines, ports, docks, construction machinery, etc.

符合標準 Standards Compliant

·YW-P系列制動器的安裝尺寸符合DIN15435和JB/T7021-2006標準。

YW-P-A安裝尺寸符合GB6333-1986。技術要求符合JB/T6406-2006標準。

·YW-P series brakes are installed in accordance with DIN1545 and JB/T7021-2006.YW-P-A mountingdimensions conform to GB6333-1986.Technical requirements meet JB/T6406-2006 standards.

主要特點 Main Feature

·性能安全可靠，制動平穩,動作頻率高。

·主要擺動鉸點均設有自潤滑軸承，傳動效率高，壽命長，在使用中無需潤滑。

·聯鎖式退距均等裝置，在使用過程中始終保持兩側瓦塊退距均等,避免因退距不均使一側制動襯墊浮貼制動輪的現象。

·無石棉制動襯墊與制動瓦塊采用卡裝插入式。安全可靠，更換方便、快捷。

·Safe and reliable performance,smooth braking, high frequency of action.

·The main swing hinge points are equipped with self-lubricating bearings, which have hightransmission efficiency, long service life and no lubrication during use.

·Interlocking shoe clearance balancing device and shoe auto-aligning device constantlyequalize the clearance of brake shoes on both sides and make adjustment unnecessary,completely avoiding brake lining one side sticking to brake wheel.

·Brake lining is of card-mounted and entirely-shaped structure, which is easy and quick toreplace.

使用條件 Operating Condition

·環境溫度:-20℃ ~+50℃

·周?chē)ぷ鳝h(huán)境中不得有易燃、易爆及腐蝕性氣體，否則應采用防腐型產品。

·相對濕度:空氣相對濕度不大于90%

·使用地點的海拔高度符合GB755-2019

·有特殊要求時，在訂貨時協商確定。

OPERATING CONDITION

·Ambient temperature: -20℃~+50℃

·Flammable, explosive and corrosive gases shall not be allowed in the surrounding workingenvironment, otherwise anti-corrosion products shall be used.

·Relative humidity: the relative humidity of the air is not more than 90%

·The altitude of the place of use conforms to GB755-2019

·Special requirements can be discussed before production.