MW(Z)系列電磁鐵鼓式制動器  MW(Z) SERIES ELECTROMAGNETIC DRUM BRAKES

應用Application

·MW(Z)系列電磁鐵鼓式制動器，廣泛用于起重、運輸、冶金、礦山、港口、碼頭、建筑機械等機械驅動裝置的減速和停車制動。

APPLICATION

·MW(Z)series electromagnetic drum brakes are widely used for deceleration and parking brakes of mechanical drive devices such as lifting, transportation, metallurgy , mines, ports, docks and constructionmachinery.

符合標準Standards Compliant

·該系列制動器的安裝尺寸和制動力矩參數及技術要求符合JB/T7685-2006標準。

·Installation dimensions, braking torque parameters and technical requirements of this series of brakesconform to JB/T7685-2006 standard.

使用條件 Operating Condition

·環境溫度:-25℃~+40℃

·交流380V、50Hz電源，MWZ產品為直流電源，額定電壓為220V。

·制動器周圍工作環境中不得有易燃、易爆及足以腐蝕金屬及破壞絕緣的氣體和導電塵埃。

·相對濕度:空氣相對濕度不大于90%·使用地點的海拔高度不超過2000m

·戶外雨雪侵蝕或有腐蝕性氣體和介質應采用防腐型產品。

·有特殊要求時，在訂貨時協商確定。

OPERATING CONDITION

·Ambient temperature: -25℃~+40℃

·AC 380V 50Hz,The MWZ product is a DC power supply, with a rated voltage of 220v.

·The working environment around the brake must be free from inflammable, explosivegases and conductive dust sufficient to corrode metals and destroy insulation.

·Relative humidity: the relative humidity of the air is not more than 90%

·The altitude of the place of use shall not exceed 2000m

·Rain and snow erosion or corrosive gases and media should be corrosionresistant.

·Specialrequirements can be discussed before production.