TYWZ2系列腳踏液壓鼓式制動器  TYWZ2 SERIES FOOT OPERATED HYDRAULIC DRUM BRAKES

應用 Application

·TYWZ2系列腳踏液壓鼓式制動器，主要用于起重、運輸、冶金、礦山、港口、碼頭、建筑機械等中、小型起重機大車運行機構的平穩減速制動，是一種常開式制動器，為操作人員提供了一種平穩放慢和減速制動的方法。

APPLICATION

·TYWZ2 series pedal hydraulic drum brake is mainly used for the smooth deceleration braking of smalland medium cranes,such as liting,transportation，metallurgy，mining，port,wharf, constructionmachinery, etc. it is a kind of normally open brake，which provides a smooth deceleration and deceleration braking method for operators

符合標準 Standards Compliant

·TYWZ2系列腳踏液壓制動器的安裝尺寸符合DIN15435和JB/ZQ4388-2006標準。技術要求符合JB/T6406-2006標準。

STANDARDS COMPLIANT

·The installation dimensions of TYWZ2 series foot hydraulic brake conform to din15435 and JB/zQ4388-2006 standards. The technical requirements conform to JB/T6406-2006 standard.

主要特點 Main Feature

·制動襯墊為卡裝式整體成型結構，更換十分方便、快捷。

·聯鎖式退距均等裝置和瓦塊自動隨位裝置，使用過程中始終保持兩側瓦塊退距均等，避免因退距不均使一側制動襯墊浮貼制動輪的現象。

·主要擺動鉸點均設有自潤滑軸承，傳動效率高，壽命長，使用中無需潤滑。

·帶有手動閉合(上閘)裝置，在非工作狀態下有需要時，可通過其進行維持制動。

MAIN FEATURE

·Brake lining is of clamped integral forming structure, which is easy and quick to replace.

·Interlocking shoe clearance balancing device (patented technology)and shoe auto-aligning deviceconstantly equalize the clearance of brake shoes on both sides and make adjustment unnecessary,completely avoiding brake lining one side sticking to brake wheel.

·Main hinge points are equipped with self-lubricating bearing,making high efficiency of transmission,long ser vice life.Lubricating is unnecessary during operation.

·With manual closing (Upper Gate) device，it can be maintained and maintained in case of nonworking condition.

使用條件 Operating Condition

·環境溫度:-20℃~+50℃

·制動器周圍環境中，不得有易燃、易爆及足以腐蝕金屬和破壞絕緣的氣體和導電塵埃的場合。

·相對濕度:空氣相對濕度不大于90%

·使用地點的海拔高度符合GB755-2019

·戶外雨雪侵蝕或有腐蝕性氣體和介質應采用防腐型產品。

·有特殊要求時，在訂貨時協商確定。

OPERATING CONDITION

·Ambient temperature:-20℃~+50℃

·There shall be no inflammable，explosive gas and conductive dust that can corrodemetal and destroy insulation in the environment around the brake.

·Relative humidity: the relative humidity of the air is not more than 90%

·The altitude of the place of use conforms to GB755-2019

·Rain and snow erosion or corrosive gases and media should be corrosion resistant.

·Special requirements can be discussed before production.