YW-K系列常開型電力液壓鼓式制動器 YW-KSERIES OFTEN OPEN ELECTRO-HYDRAULIC DRUM BRAKES

應用Application

·YW-K系列電力液壓鼓式制動器，主要用于各類通用橋、門式起重機的大車運行機構的減速制動，也可用于非提升式絞車驅動裝置減速制動。

APPLICATION

YW-K series electric hydraulic drum brake is mainly used for deceleration braking of trolley runningmechanism of all kinds of universal bridge and gantry crane,and also for deceleration braking of non-lifting winch drive.

符合標準Standards Compliant

·YW-K系列常開式制動器的連接尺寸和技術要求符合JB/T6406-2006標準，制動力矩參數符合GB6333-86標準。

·配備符合DIN15430標準的Ed系列電力液壓推動器。

STANDARDS COMPLIANT

·The dimensions and braking torque parameters of YW-Kseries normal open brakes comply with.JB/T6406-2006 standard and DIN15435 standard.

·They are equipped with Ed series thrusters which comply with DIN15430 standard.

使用條件 Operating Condition

·環境溫度:-20℃~+50℃

·周圍工作環境中不得有易燃、易爆及腐蝕性氣體，否則應采用防腐型產品。

·相對濕度:空氣相對濕度不大于90%

·電源電壓:3相、交流380V、50Hz(其它電源等級可按需要定制)

·有特殊要求時,在訂貨時協商確定。

OPERATING CONDITION

·Ambient femperature:-20℃~+50℃

·Flammable, explosive and corrosive gases are not allowed in the surrounding working environment,otherwise anti-corrosion products should be used.

·Relative humidity: the relative humidity of the air is not more than 90%

·Voltages: AC 3 phase 380V,50Hz ( Other voltage can be made as required ). 

·Special requirements can be discussed before production.

主要特點 Main Feature

·性能安全可靠，制動平穩，動作頻率高。

·主要擺動鉸點均設有自潤滑軸承，傳動效率高，壽命長，使用中無需潤滑。

·聯鎖式退距均等裝置，在使用中始終保持兩側瓦塊退距均等，避兔因退距不均使一側制動襯墊浮貼制動輪的現象。

·制動襯墊為卡裝式整體成型結構，更換十分方便、快捷。

·制動彈簧設在方管內布置并設有標尺，保護彈簧不受損壞和污染。

·采用Ed系列推動器配套，動作靈敏，壽命長。

·常開式設計，(通電)推動器制動，(斷電)彈簧釋放。

MAIN FEATURE

·Safe and reliable performance, smooth braking, high action frequency.

·Main hinge points are equipped with self-lubricating bearing，making high efficiency oftransmission，long service life.Lubricating is unnecessary during operation.

·Interiocking shoe clearance balancing device and shoe auto-aligning device constantlyequalize the clearance of brake shoes on both sides and make adjustment unnecessary,completely avoiding brake lining one side sticking to brake wheel.

·Brake lining is of clamped integral forming structure, which is easy and quick to replace.

·Enclosed spring tube protects spring from damage and contamination.

·The Ed series thrusters are characterized by flexible action and long operating life.

·Normally open design，(power on)Braking by thruster,(power off ) spring release.